Mobile Home Axles Conversion Kit

I doubt you will get a 5 lug to work. Same is true for the brake kits available for these axles, but you have to weld on a flange for the backing plate.

Live Axle GoKart Kit Frame not included Go kart kits

The kit came with both inner & outter bearings, hubs with races in them, dust caps, lug nuts, and 2 different size grease seals to take out all of the guesswork.

Mobile home axles conversion kit. The 3.5k is 2 3/8 dia and the 6k is a 3 dia axle. They also have complete brake kits with the same bearing dimensions. Welcome to the trailer parts unlimited.

This auction is for 2 new 6,000# idler hubs (6 bolt on 5.5 circle) with 2 6000# bearing kits. It is possible that there may not be a compatible replacement hub that will convert your current mobile home axle to a more traditional size of hub, that can be used with standard size rims, tires and. We offers a wide variety of trailer parts, truck and trailer tires, custom rims, trailer wheels and anything imaginable for trailers.

8000# dexter axle parts all dexter axle parts for 8000# axles. This is a complete kit for one axle. A dexter 6000 pound 6x5.5 lug hub fits the axle.

One axle has brakes, the other does not. It was called the mha (mobile home axle) and was supposed to be disposable. 4,500 lbs mobile home axle parts dexter mobile home axle parts.

This suspension consisted of an axle with drum brakes and springs. I found out later that they were mobile home axles. The key difference between trailer and mh axles is the thickness of the tubing.

From a 5200 lb to a 7000 lb axle on an old travel trailer the axles could either be a 3.5k or a 6k. I think that most mobile home axles will take 8 lug wheel hubs as they often use a common spindle with trailers. #9 · dec 14, 2002.

Mh can be 3/16 and trailer are 1/4. Universal, will fit most mobile home axles, fits axles using either lug bolts or lug studs. Fits only continental axles with formed steel hubs.

Since mobile home axles are not intended for continued use, replacement parts and compatible conversion parts are not usually readily available. Basicaly you can put all new hubs, bearings, seals, etc, on one axle and all. What hubs or kit can i use to convert these axles to regular wheels?

They both use the same bearings, outer bearing is lm67048. 5200# / 6000# axle parts 5200# / 6000# dexter axle parts. Sometimes referred to as wedges.

7000# axle parts dexter straight & torsion 7000# axle parts, hubs, electric brakes and bearings. Usa timken trailer bearing seal kit 8 lug 6000# 7000# axle 14125a 25580 bearing. I had upgraded from the weld on mh style when i refurbished the axles.

The inner and outer bearings are the same and the brakes should be 12 x 2 dexter axles carries the same bearings on the id. Plated steel, 1/2 with 20 threads per inch. I have an equipment trailer with 2 dexter axles, currently it uses 14.5inch wheels that bolt on in similar fashion to those on a mobile home.

7200# axle parts dexter 7200# axle parts. I thought the 14.5 tires would be a pita too, until i did some calling.

Pin on Motorcycle Accessories & Parts